Condor XC-002 User Manual

Mechanical Key Cutting Machine CONDOR XC-002
4.3.3 ROTATION SPEED ADJUSTER
There are four gears to control rotation speed - neutral, OFF, 1 and 2,
respectively, means motor turnoff, standby, low speed and high speed four
running modes.
4.3.4 INDICATOR LIGHT OF HEIGHT LEVEL ADJUSTMENT
1) If the heights of tracer and cutter are the same, two indicator lights will
be both on when tracer and cutter’s tops have contacted with the
clamp by main handle.
2) If trace is higher than cutter, the left indicator light will be on, means
“Lower”.
3) If trace is lower than cutter, the right indicator light will be on, means
“Raise”.
10

Condor XC-002 Specifications

General

Brand	Condor
Model	XC-002
Category	Cutter
Language	English