Contax Tvs III - Loading the Battery

© Open the battery
compartment cover by
turning it with a coin in the
direction of the arrow.
® Load the battery in the battery
compartment with the plus(+)
and minus(-) ends correctly
placed as illustrated, then
replace the cover.
<Battery Check>
After the battery is loaded, turn on the
camera. Then, ” | '' (Display of
Remaining Battery Capacity) appears in
the display panel.
26
Use one 3V lithium battery (CR123 or DL123A) / Eine 3 V-Lithiumbatterie (CR123
Oder DL123A) verwenden. / Utilisez une pile lithium 3V (CR123 ou DL123A) /
Utilice una pila de litio de 3V (CR123 o DL123A)