Edition 05/2021 – CC200 D – Notice technique – page 18
SACOME, Document CONFIDENTIEL, Ne peut être reproduit ni communiqué sans notre accord préalable.
➢ Extraction time on the display:
Allows you to see for each group, the extraction time done to make a coffee.
To see this «Extraction time» on display, you need to activate this function. This setting is done by pressing
+ or -. Button. You need to choose for a 2 groups or a 3 groups machine
When «Extraction time» is activated, display shows:
For a 3 groups
For a 2 groups
Time starts to run from the start of the infusion (pre infusion is not recognized) and ends at the closing of
the solenoid coffee. Time (max 99 sec) is displayed until another coffee is done.
T1 is the extraction time recorded on group 1.
T2 is the extraction time recorded on group 2.
T3 is the extraction time recorded on group 3.
➢ Pre Brewing utilisation:
Enables or disables pre-brewing on the 2 keys espresso.
Change with + or -.
➢ Filling the boiler:
Allows to choose the filling of the boiler :
With pump (if the machine works with tank)
Without pump (if the machine is connected on the network)
To Next Page
Loading...
