Application Specific Tab
The Application Specific tab
allows the user to create
RollerMouse Pro button
layouts that will automatically
activate and replace the default
layout any time the user opens
a specific application. While
these custom layouts can be
associated with any
application, only the scroll
wheel, scroll button, fourth
button, and fifth button can be
assigned new functions. All
other buttons maintain the
layout from the currently
selected default mode.
To create a new application specific layout:
1. Select New
2. A dialogue box labeled Target Application Selection will appear. Within this
dialogue box, locate and select the executable file (.exe file) that runs the
application with which you wish to associate the layout.
3. Once the .exe file has been located, double click on the executable file or
select the executable file and select Open.
4. In the Contour Mouse Control Panel, program the assign the desired functions
to the three buttons (scroll, fourth, and fifth) and the scroll wheel.
5. Select Apply.
Additionally, application specific layouts can be created directly from the desktop. With
the desired application open and active on the desktop, click on the Contour Mouse icon
located on the taskbar tray. A small menu will appear. Select “Create a new setting for
the current application.” This will automatically open the Contour Mouse Control Panel
to the Application Specific tab.
Modifications will only take effect once the Apply or OK buttons have been selected.
The Apply button will accept modifications but leave the Contour Mouse Control Panel
open while the OK button will accept modifications and close the Contour Mouse
To Next Page
Loading...
Need help?
General
Weight and Dimensions
