20
4.
(Optional) Press the Outputs button to toggle back to
the last Output screen that was accessed.
5. Press the Exit button to return to the In to Out
Assignments screen.
View Network Settings
1. On the In to Out Assignments screen, press Network.
To display the network settings, select Ethernet or
Zigbee (depending on which the amp uses).
2. To edit these settings, see Set Network Settings on
page 13.
3. Press the Back button to return to the In to Out
Assignments screen.
Set Display Preferences
To set your viewing preferences for the front display:
1. On the In to Out Assignments screen, press the
Display button. The Display Configuration screen is
displayed.
To Next Page
Loading...
