Controls CX Series - MANUAL OPERATION; POWER UP, STARTING, AND STOPPING PROCEDURES

9
SPECIAL NOTE
When using the CX-7500-AS as a replacement panel, check the Regen Switch Address
to make sure the engine can regen properly
MANUAL OPERATION
POWER UP
Turn on the power to the display using the ON/OFF/CRANK key switch. The display will illuminate and
show the module part number version in the upper left status line and the graphical logo will be
centered in the screen. The LED indicators will turn on for one second to verify operation.
Warning Lamp
Low DEF Lamp
Regen Active Lamp
Speed Control
Buttons
Operating Keys
Menu Keys
Stop Lamp