35
OTHER MODULE FUNCTIONALITY
STANDARD FEATURES
The control panel has many options that can be configured, enabled or selected that will enhance the
operation of the equipment. A list of items is below with descriptions on the selection and use of
each.
CUSTOM SPLASH SCREEN
The control panel can be programmed to customize the initial display screen when powered up.
OEMs can provide a graphic file of their artwork to CI for loading into the firmware application.
SENDER FAILURE
The control panel can detect when a local sender for a parameter, such as oil pressure, coolant
temperature or fuel level is not present. The display will indicate that a valid signal is not present by
placing dashes in the area of the display that the value should be, and highlighting it if the parameter
is used for protection. Out of Range warnings or shutdowns can be configured.
To Next Page
Loading...
Need help?
General
