Controls MVP-238 User Manual

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 14 -
ENGINE SAFETY CONFIGURATION
The Engine Safety Configuration menu enables the user to set warnings for the critical engine
parameters. Care should be taken when configuring to match the engine manufacturers
recommended guidelines.
Heading
Default
Range
Sender Check Bypass
0:10 Seconds
0:05 -1:00
Fuel Level Check
Off
Off/Always/Run
Low Fuel Pre Alarm
20%
0-100%
Low Fuel Alarm
1%
0-100%
Fuel Level Alarm Action
Shutdown
Shutdown/Force to Idle/Speed Limit/
Torque Derate/Disabled
Fuel Alarm Delay
0:05
0:00-1:40
Oil Pressure Check
Run
Off/Always/Run
Oil Pressure Alarm Action
Shutdown
Shutdown/Force to Idle/Speed Limit/
Torque Derate/Disabled
Oil Pressure Alarm Delay
0:05
0:00-1:40
Temperature Check
Run
Off/Always/Run
Low Temperature Pre Alarm
0° F
0-300° F
Low Temperature Alarm
0° F
0-300° F
High Temperature Pre alarm @
240° F
150-300° F
High Temperature Alarm @
240° F
150-300° F
Coolant Temperature Alarm Action
Shutdown
Shutdown/Force to Idle/Speed Limit/
Torque Derate/Disabled
Temperature Alarm Delay
0:05
0:00-1:40
Speed Limit
1600 RPM
800-2900 RPM
Torque Derate Limit
50%
0-125%
Low Oil Pressure Pre Alarm
0 PSI
0-100 PSI
Low Oil Pressure Alarm
2 PSI
0-100 PSI

Controls MVP-238 Specifications

General

Brand	Controls
Model	MVP-238
Category	Controller
Language	English