Controls MVP-238 User Manual

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 7 -
Engine Identification
This menu allows for the viewing on the engine model number and serial number.
Module Information
This menu allows for the viewing of the Module Part number and Software Version.
Controller Setup
When navigating through the Operator menu, you will arrive at the Controller Setup screen. To
configure the module to new settings, you can enter into this area by pressing the Up arrow key.
The next screen will ask for a password. If no password, or an incorrect password is used, navigation
into the menu is still possible and permitted, however, the ability to make changes will be restricted.
To enter the password, press the Enter key and brackets will appear. Use the Up and Down arrow
keys to set each digit individually, pressing the Enter key to index to the next digit from left to right.
Once the last digit is entered, the brackets will disappear and the digits will be represented with
asterisks. Pressing the Up arrow will index you to the Quick Setup menu and programming can
continue.

Controls MVP-238 Specifications

General

Brand	Controls
Model	MVP-238
Category	Controller
Language	English