How to do it correctly
minis user manual 136
► Fitting the air guide panel to rack (mini 6.10 and mini 10.10)
Hot surfaces
Risk of burns from high temperatures inside the oven and on the inside of the appliance door
You may get burnt if you touch any of the interior parts of the oven, the inside of the appliance door or
any parts that were inside the oven during cooking.
f Wear personal protection equipment as specified in safety regulations.
Removing the air guide panel
To remove an air guide panel, follow the steps below:
Step Action Illustration
1 Slide the air guide panel upwards.
2 Tilt the air guide panel backwards and disconnect the shelf
rack from the air guide panel.
Fitting the air guide panel
To fit the air guide panel, follow the steps in the reverse order. Make sure that the air guide panel is
always in place during cooking, otherwise food is cooked unevenly.
More on this ...
How to do it correctly
Inserting and removing racks...........................................................................................................135
To Next Page
Loading...
