Cool Automation Cool Master 1000D - Heat; Auto

Commands Reference
CoolMaster PRM
11
www.coolautomation.com
© 2015 Cool Automation LTD
Rev 4.08
DESCRIPTION
Set indoor unit UID mode to DRY.
EXAMPLE
>dry 102
OK
EXIT CODE
OK
Request Successfully Executed
ERROR:1
Unit with specified UID not found
4.1.6 heat
SYNOPSIS
heat <UID>
DESCRIPTION
Set indoor unit UID mode to HEAT.
EXAMPLE
>heat 102
OK
EXIT CODE
OK
Request Successfully Executed
ERROR:1
Unit with specified UID not found
4.1.7 auto
SYNOPSIS
auto <UID>
DESCRIPTION
Set indoor unit UID mode to AUTO. Status report for the Indoor Unit in Auto mode can be
· Auto - Auto Mode
· AutC - Auto Mode Cooling
· AutH - Auto Mode Heating
EXAMPLE
>auto 102
OK
EXIT CODE
OK
Request Successfully Executed
ERROR:1
Unit with specified UID not found