Need help?Do you have a question about the Cooler Master HYPER 212 LED and is the answer not in the manual?
Illustrates positioning the heatsink with attached bracket onto the AMD motherboard.
Shows the process of securing the heatsink onto the AMD motherboard using the bracket.
Details attaching bracket F and clip J, followed by bracket D and screws I for AMD.
Illustrates installing backplate E, standoffs G, and securing with nuts L for AMD.
Demonstrates the final tightening sequence for the AMD CPU cooler installation.
Illustrates the mounting process for Intel LGA 1366/115x/775 sockets.
Shows the final tightening sequence for Intel LGA 1366/115x/775 CPU coolers.
Details the installation steps for Intel LGA 2066, 2011-v3, and 2011 sockets.
Illustrates attaching the main fan to the CPU cooler heatsink assembly.
Provides instructions and multilingual information for installing an optional second fan.
General| Type | Cooler |
|---|---|
| Fan diameter | 120 mm |
| Maximum airflow | 66.3 cfm |
| Suitable location | Processor |
| Maximum air pressure | 1.7 mmH2O |
| Rotational speed (max) | 1600 RPM |
| Rotational speed (min) | 600 RPM |
| Noise level (low speed) | 9 dB |
| Noise level (high speed) | 31 dB |
| Compatible processor series | - |
| Supported processor sockets | Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, LGA 1151 (Socket H4), LGA 2011-v3 (Socket R) |
| Mean time between failures (MTBF) | 280000 h |
| Fan connector | 4-pin |
| Product color | Black, Metallic, Red |
| Number of fans | 1 fan(s) |
| Illumination LED | Yes |
| Illumination color | Red |
| Number of heat pipes | 4 |
| Voltage | 12 V |
| Power consumption (typical) | 2.28 W |
| Heatsink dimensions (W x D x H) | 60 x 116 x 160 mm |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Width | 84 mm |
|---|---|
| Height | 160 mm |
| Heatsink weight | 468 g |
| Heat pipes diameter | 6 mm |
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
To Next Page