Need help?Do you have a question about the Cooler Master V8 GTS and is the answer not in the manual?
The main CPU cooler unit.
Various back plates for Intel and AMD sockets.
Includes stand-offs, nuts, screws, thermal grease, and adapter.
Remove the protective layer from the cooler's base before installation.
Apply a thin layer of thermal grease onto the cooler base surface.
Steps for installing the cooler on Intel LGA 1366/1156/1155/1150/775 sockets.
Steps for installing the cooler on Intel LGA 2011 sockets.
Steps for installing the cooler on AMD FM1/FM2/AM3+/AM3/AM2 sockets.
Procedure for AMD motherboards using Retention Plate (1).
Procedure for AMD motherboards using Retention Plate (2).
Connect the fan power cable to the motherboard.
Information on 4-pin (PWM) and 3-pin connections affecting fan speed.
General| Type | Cooler |
|---|---|
| Fan diameter | 140 mm |
| Maximum airflow | 82 cfm |
| Suitable location | Processor |
| Rotational speed (max) | 1600 RPM |
| Rotational speed (min) | 600 RPM |
| Noise level (low speed) | 16 dB |
| Noise level (high speed) | 36 dB |
| Minimum airflow (imperial) | 28 cfm |
| Compatible processor series | - |
| Supported processor sockets | Socket AM2, Socket AM3, Socket AM3+, Socket FM1, Socket FM2 |
| Mean time between failures (MTBF) | 160000 h |
| Product color | Black, Red |
| Number of heat pipes | 8 |
| Voltage | 12 V |
| Power consumption (typical) | 3.72 W |
| Heatsink dimensions (W x D x H) | 154 x 140 x 153.5 mm |
Weight and Dimensions| Depth | 149.8 mm |
|---|---|
| Width | 154 mm |
| Height | 166.5 mm |
| Weight | 854 g |
| Heat pipes diameter | 6 mm |
To Next Page