Cooler Master MasterLiquid Pro 120

Need help?

Do you have a question about the Cooler Master MasterLiquid Pro 120 and is the answer not in the manual?

Summary

Attaching fans to the CPU cooler radiator using screws for 120/140mm models.

Securing the radiator assembly to the computer motherboard for 120/140mm models.

Attaching two fans to the CPU cooler radiator with screws for 240/280mm models.

Securing the 240/280mm radiator assembly to the motherboard.

Peeling off the protective label from the cooler base before installation.

Applying thermal compound to the CPU for optimal heat transfer.

Attaching specific AMD mounting brackets and clips to the cooler.

Mounting the CPU cooler assembly onto the prepared AMD motherboard bracket.

Installing the AMD backplate (C) onto the motherboard.

Fastening the CPU cooler to the AMD backplate using screws (L).

Installing standoffs (I) for LGA 2011-v3/2011 Intel sockets.

Attaching fans to the radiator for LGA 2011-v3/2011 installation.

Securing the CPU cooler to the LGA 2011-v3/2011 motherboard mount.

Connecting the fan (N) and pump (O) cables to the motherboard.

General

Noise level	6 dB
Fan connector	4-pin
Product color	Black
Number of fans	1 fan(s)
Radiator material	Aluminum
Water block material	Copper
Type	All-in-one liquid cooler
Fan diameter	120 mm
Fan speed (max)	2000 RPM
Fan speed (min)	650 RPM
Maximum airflow	66.7 cfm
Pump noise level	12 dB
Suitable location	Processor
Pump motor speed (max)	3300 RPM
Pump motor speed (min)	1100 RPM
Supported processor sockets	Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, LGA 1151 (Socket H4), LGA 2011-v3 (Socket R)
Mean time between failures (MTBF)	490000 h
Pump current	500 mA
Pump voltage	12 V
Pump power consumption	6 W