Need help?Do you have a question about the Cooler Master Hyper T4 and is the answer not in the manual?
Lists all included parts such as CPU cooler, back plate, retention plates, stands-offs, nuts, thermal grease, fan brackets, screws, and rubber pads.
Advises caution with sharp edges to avoid injury and keeping the product away from children.
Step-by-step guide for installing the cooler on Intel LGA 2011 sockets, including thermal grease application.
Details the installation process for Intel sockets LGA 775, 1155, 1156, and 1366 using specific mounting hardware.
Outlines the installation steps for AMD sockets FM1, AM3+, AM3, AM2+, and AM2 using the provided brackets.
Instructions for attaching the fan(s) to the cooler assembly using brackets and screws.
Explains how to connect the cooler's fan cable to either a 4-pin or 3-pin connector on the motherboard, noting PWM function.
Provides disclaimers regarding liability and notes that information is subject to change without notice.
General| Type | Cooler |
|---|---|
| Fan diameter | 120 mm |
| Maximum airflow | 70 cfm |
| Suitable location | Processor |
| Maximum air pressure | 2.14 mmH2O |
| Minimum air pressure | 0.3 mmH2O |
| Rotational speed (max) | 1800 RPM |
| Rotational speed (min) | 600 RPM |
| Noise level (high speed) | 31.6 dB |
| Minimum airflow (imperial) | 24 cfm |
| Compatible processor series | Not supported |
| Supported processor sockets | Socket AM2, Socket AM3, Socket AM3+, Socket FM1 |
| Mean time between failures (MTBF) | 40000 h |
| Connector(s) | 4-pin PWM |
| Heatsink dimensions (W x D x H) | 128 x 44 x 152.3 mm |
| Material | Aluminum |
| Product color | Black, Metallic |
| Number of fans | 1 fan(s) |
| Bearing technology | Rifle |
| Voltage | 12 V |
| Power consumption (typical) | 2.64 W |
Weight and Dimensions| Depth | 72.5 mm |
|---|---|
| Width | 131.6 mm |
| Height | 152.3 mm |
| Weight | 548 g |
To Next Page