14
Update your mobile hotspot to the most up-to-date software version.
1. Access http://mobile.hotspot or http://192.168.0.1.
2. Within the Web User Interface, go to Settings > Device Settings > Software
Updates. Click the Check for Update button to check if there is any new software
version available.
3. If an update is available, a window will pop up to request you to confirm the update.
Click Yes to update.
Note: Do not remove the battery during software updating. This may cause the software
update to fail.
Firewall
• IP Filtering: You can set firewall policies to protect your network from viruses, worms
and malicious activities on the Internet.
• Port Forwarding: Configure a Port Forwarding setting to enable external computers
to access WWW, FTP or other services provided by LAN.
• UPnP Settings: Universal Plug and Play (UPnP) is a set of networking protocols that
allows networked devices, such as PC, printers, Internet gateways, Wi-Fi access
points and mobile devices, to seamlessly discover each other’s presence on the
network and establish functional network services for data sharing, communications,
and entertainment.
• DMZ Settings: You can configure DMZ address, enable or disable DMZ.
• Whitelist or Blacklist of MAC: Add whitelist or blacklist users.
Using Mobile Hotspot’s Whitelist
Your mobile hotspot is equipped with a Whitelist feature that will allow you to secure your
network’s privacy. When this feature is activated, only users that have been granted
access by adding a user’s MAC address will be able to connect to the network. When the
primary user deactivates this feature, all other users will be allowed access to network via
Wi-Fi and use of correct password.
To Next Page
Loading...
