15
1. Log into the Web User Interface.
2. Go to Settings > Firewall > Whitelist or Blacklist of MAC. This feature is disabled
by default. Any user who inputs the correct password can access the network.
3. Select Whitelist for the MAC Filter to enable the whitelist feature. Enter the nickname
and the MAC address, and click Apply to add a user to the whitelist. The device
supports connecting up to 10 devices at the same time.
4. If you remove a user from the whitelist, such user will no longer be allowed to connect
to the network. Click Delete to remove.
Router Settings
• Router Settings: Set IP address, subnet mask, DHCP server, start IP, end IP and
DHCP lease time.
• DNS Settings: Enable or disable DNS manual mode.
To Next Page
Loading...
