16
3. Contact your ARC and quote the code.
The ARC will ask you for details of the
alarm. If there is no need for an
engineer to visit, the ARC will give you a
remote reset code.
- REMOTE RESET –
Reply > 0000
4. Press | to display the screen shown
opposite, enter the remote reset code,
then press [.
Other Operations
Special User Codes
Depending on how your system is set up
1
,
entering a user code may:
•
••
•
Generate a silent duress alarm to
indicate that you are being coerced
into gaining access.
•
••
•
Generate a full panic alarm.
•
••
•
Isolate (shunt) zones. Entering the code
again reinstates the zones.
Panic Alarm at Keypad
If keypad panic alarms are enabled
2
,
pressing keys 1 and 3 generates a panic
alarm.
1
User option 2-4-1
2
Engineer option 1-9-1-25
To Next Page
Loading...
