To Next PageTo Next Page
Need help?Do you have a question about the Core CGT 400 and is the answer not in the manual?
Always wear appropriate safety gear for eye, ear, and body protection.
Use proper circuit protection to avoid electrical hazards.
Never use fixed blades or metal line; use only authorized trimmer line.
Keep bystanders at least 50 feet away; stop tool if approached.
Always remove Power Cell before adjustments or servicing.
Use only CORE™ chargers for CORE™ Power Cells to prevent fire/explosion.
Use only OEM parts to avoid hazards or damage.
Solvents/chemicals can cause fire, explosion, or damage components.
Modifications are misuse, void warranty, and can cause injury.
Cover terminals, avoid short circuits, and dispose properly.
Use only specified chargers; follow charging instructions for rapid or standard.
Insert charged Power Cell into trimmer; ensure it is locked.
Cut line, align spool, insert line into eyelets, wind line onto spool.
Remove bump head by rotating clockwise; motor shaft has reverse thread.
Align spool slots with pins, insert, rotate, ensure proper seating.
Be careful around hard objects; don't feed line too fast; use line tip.
Instructions for sweeping, edging, and advancing trimmer line.
Reload bump head with trimmer line; remove Power Cell first.
Remove spool to retrieve or untangle line; remove Power Cell first.
Reinstall empty spool into bump head, reverse removal steps.
General
