19
CRC-6500-S Standard Charger – cont’d
NOTES:
a) Lithium-Ion Power Cells will continue
to provide nearly full power with minimal
power fade unlike traditional batteries;
when the Power Cell is fully discharged,
the Power Cell electronic control
circuitry will immediately cut power
output to the tool without notice. A
discharged Power Cell should be
promptly recharged to maintain its
operational voltage potential and to be
ready for future use.
b) Do NOT charge the Power Cell when
the work area or the Power Cell
temperature is at or below 32° F (0°C)
or above 113° F (45°C). The optimal
temperature is 68° F (20°C).
c) Remove the Power Cell from the
charger and unplug the charger once
the Power Cell has been completely
charged.
ASSEMBLY AND OPERATING
To Next Page
Loading...
