3-67
Controls and Indicators
Do I want the Hydro-Plate to help in planing and staying on plane
in tight turns?
NCRS Auto Deploy – On/Off - this allows the user turn on
the Auto Deploy feature which will move the Hydro-Plate to
position targets based on NCRS Intensity setting, ballast
levels, and dynamic conditions or set the auto deploy feature
to OFF and have the Hydro-Plate remain at the NCRS Set
Point Target.
How aggressive do I want the automatic response of the Hydro-
Plate to be when Auto Deploy is on?
NCRS Intensity – Low/High – The NCRS Intensity setting
coupled with Current Ballast Level determines how
aggressively the Hydro-Plate will deploy when in the Auto
Deploy Mode of operation only; it does not affect the final
NCRS Set Point.
How large/steep do I want the wake once my desired speed is
reached?
NCRS Set Point – This allows the user to enter a value of 0 to
5 which controls the Wake Size/Shape by controlling the
final Hydro-Plate position once the boat has reached its
desired Set Speed.
a. 0 – Smallest and Most Rounded Shaped Wake
b. 5 – Largest and Most Vert Shaped Wake
To Next Page
Loading...
