EasyManua.ls Logo

CORRECT CRAFT G21 - Glossary

CORRECT CRAFT G21
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
G-1
Glossary
ABYC – American Boat and Yacht Council, Inc.
AFLOAT – On the water.
AFT – Toward the rear or stern of the boat.
AGROUND – Touching bottom.
AMIDSHIP – Center or middle of the boat.
ANCHOR – (1) An iron casting shaped to grip the lake bottom to
hold the boat. (2) The act of setting the anchor.
ANODE – An electrode carrying a positive charge.
ASHORE – On the shore.
ASTERN – Toward the stern.
BAIL – To remove water from the bottom of the boat with a pump,
bucket, sponge, etc.
BALLAST – Any solid or liquid weight placed in a boat to increase
the draft, to change the trim.
BEAM – The widest point on the boat.
BEARING – Relative position or direction of an object from the boat.
BILGE – The lowest interior section of the boat hull.
BOARDING – To enter the boat.
BOUNDARY WATERS – A body of water between two areas of
jurisdiction; i.e., a river between two states.
BOW – The forward end of the boat.
BULKHEAD – Vertical partition (wall) in a boat.
BUNKS – Carpeted trailer hull supports.
BURDENED BOAT – Term for the boat that must "give-way" to boats
with the right-of-way.
CAPACITY PLATE – A plate that provides maximum weight capacity
and engine horsepower rating information. It is located in full view
of the helm.
CAPSIZE – To turn over.
V-Drive Gloss_2015.qxp_Naut Air Gloss.qxd 6/26/14 1:50 PM Page G-1

Table of Contents

Related product manuals