Manufacture directive
VentoVind™ is CE-labelled.
Disclaimer
• Incorrect installation and/or incorrect handling can cause property damage as well as injury.
• The manufacturer assumes no liability for damage arising as a result of failing to follow these
instructions. Such damage is not covered by the warranty.
• Changes or modifications to the machine must not be performed without written
permission from Corroventa Avfuktning AB.
• The product, technical data and/or installation and operating instructions are subject to
change without notice.
• These user instructions contain information protected by copyright laws. No part of this
document may be reproduced, stored in an information storage system or transmitted in
any way or by any means without Corroventa AB's written consent.
Any comments regarding the content of this document must be sent to:
To Next Page
Loading...