38 39
To Remove the Oven Door:
1. Open the door completely.
2. Flip up the hinge latch on each side.
a
a
a Hinge Bracket
3
. Holding the door firmly, close the oven door completely.
4. Grasping both sides, lift up on the oven door while pushing it closed, and
then pull it away from the door frame.
5. Place the door in a protected location.
To Replace the Oven Door:
1. Insert the upper arms of both hinges into the slots. The recesses must hook on
the lips.
a
b
c
d
a Upper Arm
b Recess
c Slots
d Lip
2
.
Open the oven door.
N
OTE: You should hear a “click” sound when the door is correctly in place.
3
. Move the hinge latch on each side back into the locked position.
4. Open and close the door to test that it operates freely. If it does not, repeat
the door removal and replacement process.
5. Close and open the door slowly to assure that it is correctly and securely in
place.
Oven Care
37
REPLACING AN OVEN LIGHT
1. Disconnect power at the main power supply (fuse or circuit breaker box).
2
. Remove the bulb cover by pulling it out of the opening.
3. Remove the burned out bulb from the socket.
Oven Care
WARNING
Electrical Shock Hazard
Make sure the oven and lights are cool and power to the oven has
been turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses
serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
The oven light is a standard 25 watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the oven is cool and the
controls are turned off.
To Next Page
Loading...
Need help?
General