25
OPERATING INSTRUCTIONS
COOKTOP SURFACE COOKING
IMPORTANT: Remember to set all cooktop / oven / broiler burners control knob
to OFF position when not in use.
SURFACE BURNER OPERATION
Electric Ignition
To activate the electric ignition, simply turn the control knob counter-clockwise to maximum
power (*position). Press the knob to start the flow of gas and the ignition spark. The spark will
released at the metal tip of the white ceramic pin located on the side of the burner. Once the
flame is on, release the control knob gently.
If the flame turns off, repeat the above procedure.
ATTENTION: Do not ignite burners if the black burner cap is not installed or not
centered. The flame will be irregular.
Manual Ignition
Manual ignition is always possible even when the power is cut off or in the event of power
failure. Turn the control knob counter-clockwise to the MAXIMUM position. Light the flame
with a kitchen lighter or with a match.
• Burner Position
Example showing Front right burner
• Maximum Temperature Setting
Recommended control knob
position for burner ignition
• Minimum Temperature Setting
(*) Appliance with worktop gas
valves alternative type
To Next Page
Loading...
Need help?
General
