COTLIN LB Series - 3 Unpacking; 4 Installation Location; 5 Level Adjustment; 6 Water Supply;Drainage

安全提示
No.：JT190100017 Version No.：A0
Note: The subsequent versions of this manual are subject to change without notice, thank you
4 / 21
Unpacking
3. Unpacking
 Before unpacking, check whether the
anti-tilting signs (if any) are intact,
whether the outer packaging of the machine
is intact, and whether the model of the
machine is consistent with your purchase
 Open the package to check whether the
appearance of the machine is in good
condition, take out the accessories and
random documents, and check whether it
matches the packing list;
 Remove the protective film on the shell
(recommended).
 If there is any discrepancy or damage,
please contact our company/dealer
directly.
4. Installation location
 This ice machine is not suitable for outdoor
use, Do not install it near a heat source
or direct sunlight；
 The normal working environment temperature
is 10℃～38℃, and the water temperature is
5℃～32℃. If the ice maker works outside
the above normal temperature range for a
long time, it may affect the ice making
capacity；
 The ice maker should be installed on a solid,
flat ground；
 The ice maker should be placed close to the
source of drinking water, and it is
recommended to be within one meter of the
ice maker；
 Do not block the ventilation windows of the
ice machine, and there should be enough air
convection space around the ice machine；
 The ice machine cannot work at sub-zero
temperatures. In order to prevent the water
supply pipeline from malfunctioning, when
the temperature is below zero, please drain
the water in the ice maker (see
"Preparations for long-term storage of the
ice maker")。
5. Level Adjustment
 Screw the adjustable parts of the 4
adjusting feet to the end, and then rotate
the adjusting feet into the corresponding
mounting holes at the four corners of the
bottom plate of the ice machine；;
 Move the ice maker to the installation
location. Use a spirit level to level the
ice maker.
6. Water supply/Drainage
6.1 Water Supply
 According to the local water supply,
determine whether it is necessary to
install a water treatment system to prevent
the formation of sediments, filter out
impurities, and remove the smell of
bleaching powder；
 Please follow the guidelines below to
install the water supply pipe：
 Do not connect the ice maker to a hot
water source；
！Warning
The installation of the ice machine
should comply with safety standards, and
the ice machine should not be installed
in the aisles of public buildings。
▲Note
When adjusting the level of the ice
machine, do not use the method of putting
hard objects under the feet to adjust the
level. It is necessary to ensure that the
four feet of the ice maker are in stable
contact with the ground to prevent the
machine from vibration.
！Warning
The ice maker must be connected to a
source of potable water