10
www.starweb.com.au Covert Security & Wildlife Monitoring T.C. - User Manual March.2013
4.5 Video Length
Defines the duration (length) of each video sequence; range is 1 to 60 seconds.
4.4 Video Sound
Record video with audio; option Audio On or Audio Off
5 PIR Sensor
A PIR (passive infra red) sensor on the front of the camera detects movement of animals,
humans & vehicles as they pass within detection range. PIR sensitivity has three settings
Low - Medium & High to suit varying size & distance to targets. High is suitable for harder
to detect distant targets, Normal is a good choice for general wildlife monitoring &
surveillance, Low is suitable for monitoring small animals at close range on cleared
ground. To minimise annoying false triggering, the camera must be securely mounted with
no movement, branches & shrubs which may blow around infront of the camera sensor
should be trimmed
5.1 PIR Sensitivity
Sets motion detection sensitivity; options are High Normal Low & Off. Off is used in
conjunction with Time lapse mode.
5.2 Trigger Interval
A programmable delay following each camera trigger during which time the PIR is disabled
to prevent repeated triggering by the same moving object & allow adequate time for data to
be written to the SDHC card. Recommended Trigger Interval is 60 seconds.
DO NOT SET TRIGGER INTERVAL TO 0 Seconds.
5.3 Time Lapse
Camera automatically records images or video at a predefined interval from 5 seconds to 8
hours. Great for long duration survey work; conducting wildlife surveys on water holes &
dams, accurately determine animal numbers & movements, record months of activity at a
single location. Make a Time Lapse video of construction & other projects.
To Next Page
Loading...
