11
www.starweb.com.au Covert Security & Wildlife Monitoring T.C. - User Manual March.2013
5.4 Start Stop
Allows you program the camera to function at night only, at daytime only or for a specific
time each day which may be as short as several minutes if required. Camera commences
operation each day at the Start Time & shuts down at the End Time.
6 System Options
6.1 Time Stamp
Superimpose a Time/ Date watermark on images. Options Time Stamp On or Off.
6.3 Flash Range
Sets the light output level of the covert Infra Red illuminator, there are two settings: 6
meters or 12 meters.
6.4 Password
Program a unique password to prevent unauthorised access.
6.4 Language
Factory set to English
6.5 Beep
Disable the audible Beep, options Beep On or Off.
6.5 Overwrite
With overwrite On the camera has endless storage. New data is written over existing data.
Options are Overwrite On or Off.
To Next Page
Loading...
