4
www.starweb.com.au Covert Security & Wildlife Monitoring T.C. - User Manual March.2013
2 SETTING UP THE CAMERA
2.1 Installing the Batteries
Use high quality AA Alkaline or rechargeable 2500mA capacity Ni MH batteries.
LITHIUM BATTERIES SHOULD NOT BE USED. Replace the batteries as a complete set
of 12, do not mix & match brands of battery or different battery types.
Load 12 AA batteries, new or fully charged, into the battery tray as shown in figure 2. Follow
the
+ -
symbols on the battery compartment when installing the batteries.
Battery state of charge is indicated by the Battery Status icon. When the batteries are flat, a
red indicator led on the front panel will flash for a short time & the camera will automatically
shut down. Refer Battery Life page 14.
Figure 2: Display Screen Controls SD Card & Batteries
Power Button SD card slot
Hot Keys
To Next Page
Loading...
