Covert Brite Star - Default Settings

6
www.starweb.com.au Covert Security & Wildlife Monitoring T.C. - User Manual March.2013
2.5 Default Settings
Your Brite Star Trail Camera will be delivered pre programmed with factory Default
Settings; it requires an SD card, set of batteries, the date/ time set & it is ready for use.
Highly versatile the camera has many user programmable features which allow you to
customize its performance to match your specific applications. The various User
Programmable Options are grouped under three categories: CAM – PIR – SYS.
Default Settings & options are listed in the following chart.
Group
Parameter name
Default
Optional
settings
CAM
Camera Mode
Photo
Video- Photo+Video
Photo Size
5
M Pixel
12 - 8 or 3 MP
Photo Burst
1 Photo
2 or 3 photos
Video Size
720P
1080P, WVGA,QVGA
Video Length
5
Seconds
1-60 seconds
Video Sound
On
Off
PIR
PIR Sensitivity
Normal
High, Low, OFF
Trigger Interval
1 Minute
5 sec to 60 min.
Time Lapse
Off
On = 5 sec. to 8 hours
Start Stop (scheduled)
Off
On
Start Time
(00:00 – 23:59)
Stop Time
(00:00 – 23:59)
On
SYS
Clock
01/01/2013
Reset
Time Stamp
On
Off
Flash Range
12m
6 m
Password
Off
On
Language
English
Beep
On
Off
Overwrite
Off
On
Format
-
Enter to format
Default Set
-
Enter to reset