Setting the camera mode:
Press the ▼ button to enter the Camera Mode
option. Either Photo or Video will show up in a
white box. Press the ►button to toggle between
Photo or Video until the option you want shows in
the white box. Press OK to save this setting. The
white box will turn red to indicate it’s saved.
NOTE: If you do not press OK, your setting will
return back to the previous setting.
Camera mode settings:
PHOTO SIZE: Press the ▼or ▲ button to enter the
Photo Size option.
Press the ► arrow repeatedly to toggle between
3mp, 5mp, 8mp, 12mp, 16mp and 20mp. Press OK
once the desired option shows in the white box.
Again, the box will turn red.
PHOTO BURST: Your camera can take a 1-10 shot
burst every time the PIR is triggered to take a
photo.
To Next Page
Loading...
