photos. Plug the small jack of the cable into the
bottom of the camera. Plug the USB end into the
USB port on your home computer or USB capable
television. The USB will recognize the new
hardware and download the proper driver to view
the images or videos. The screen on the camera will
say Mass Storage. If the image files don’t
automatically open, you will need to open it using
Windows Explorer to locate the camera. It will
appear as removable disk.
Manually taking photos or video:
Put the camera in Set-up mode by making sure the
selector switch is in the SETUP position. If you are
in the MENU mode, press MENU to go to the home
screen.
Depending on if you are in VIDEO or CAMERA mode,
the following steps will vary. In CAMERA mode, to
manually take a photo, press the ► button. You
will notice the photo counter increase by 1. If you
are in VIDEO mode, press the ► button to start the
video and the ► again to stop the video. You will
To Next Page
Loading...
