OVER WRITE: The Over Write function will save
new photos over the old photos on your SD card if it
becomes full. Each time a new photo is taken the
oldest photo on the card will be overwritten.
The default for this option is OFF. If you want to
change this, Press the ▼ button to enter the Over
Write option and then press the ► button to toggle
the setting to ON. Press OK to save the setting.
FORMAT: If you get into the field and forgot to
clear your SD card before you went out, you can
clear the contents of the card using the Format
option.
If you have a new SD card, you should always
format the card before you use it in the camera. To
format the SD card, press the ▼ button until the
Format option is entered. Press the OK button.
You will see a screen that has Yes and No on it, use
the ◄ button to navigate to YES and press OK.
DEFAULT SET: The Default Set option is the last
option in the SYS tab. If you want to re-set all the
To Next Page
Loading...
