4. While aiming the remote at your device, press and hold in the SELECT key.
5. NOTE: You may have to keep the SELECT key held down for longer than a minute while the
remote control searches the entire list of codes for the device being programmed.
6. When the device turns off, release the SELECT key and the code will be saved automatically.
Setting Volume Control to Audio Device
Note: By default, the volume control is programmed to operate the TV. Use the following sequence if
you want to use your audio device to control the volume rather than the TV.
1. Press and Release the AUX key
2. Press and HOLD MUTE + SELECT simultaneously until AUX key blinks twice, then release both
keys.
3. Press and release the VOL + key.
4. Press and Release the AUX key. AUX device key blinks twice.
Using All-On Power Feature
To Next Page
Loading...
