20
PROBLEM: Tried “Search For Your Code” and still could
not find a working code.
SOLUTION: Try the “Search For Your Code” again after
clearing out the device key as follows: Press
and hold
SETUP until mode key blinks twice,
then release. Next enter
9 - 9 - 2. Then press
and
release the mode key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the remote con-
trol. For Sony, use TV code 0000 and VCR
code 0032. For Sharp, use TV code 0093 and
VCR code 0048.
ADDITIONAL INFORMATION
This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Cox Universal Remote Control.
Copyright 2005 by Universal Electronics Inc. No part of
this publication may be reproduced, transmitted, tran-
scribed, stored in any retrieval system, or translated to any
language, in any form or by any means, electronic,
mechanical, magnetic, optical, manual, or otherwise, with-
out prior written permission of Universal Electronics Inc.
To Next Page
Loading...
