8
INSTALLING BATTERIES
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline
batteries. Match the + and – marks on the
batteries to the + and – marks in the battery
case, then insert the new batteries.
3. Align the cover’s keys with the case’s holes
and press the cover back into place. The tab
should click when the cover is locked.
4.
Test the unit by pressing POWER and any mode
key (for example, AUX, DVD, TV, or CABLE). If the
batteries are inserted correctly, the selected mode
key will blink once.
NOTE: Whenever batteries need replacement, the remote
control will cease to operate. Simply replace the batteries and
the remote control will be restored to its full functionality,
complete with your favorite settings.
To Next Page
Loading...
