7
Press MUTE once to turn the
sound
off or on.
Use CH+ (or CH–) to select the
next higher (or lower) channel.
Use INPUT to control the input
select feature on most TVs.
In CABLE mode, use INPUT to view
other video sources (A or B) instead of
cable.
In all other modes, use INPUT to watch
TV or video programs on a desired
device. For amplifiers/receivers, use
INPUT to select an input source.
Press ENTER once after entering
channel numbers on some televi
sions.
Use the keypad (0 ~ 9) to
directly select channels
(e.g., 09 or 31).
Use Picture in Picture SWAP to
switch images and sound between
the main and window pictures.
Use Picture in Picture ON-OFF to
switch the Picture-In-Picture fea-
ture on or off (if available on your
TV or cable service).
Use Picture in Picture MOVE to move
the window picture to different
positions in the main picture.
Use Picture in Picture CH+ (or CH-)
to select the next higher (or lower)
PIP channel.
To Next Page
Loading...
