2.14.4.7 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the
files for the specified days. See Figure 2-151.
You can select proper setup from dropdown list. After all the setups please click save button,
system goes back to the previous menu.
Figure 2-151
2.14.4.8 Config Backup
The configuration file backup interface is shown as below. See Figure 2-152.
This function allows you to import/export system configuration. You can use this function
when there are several devices need the same setup.
Export: Please connect the peripheral device first and then go to the following interface.
Click Export button, you can see there is a corresponding “Config_Time” folder. Double
click the folder, you can view some backup files.
Import: Here you can import the configuration files from the peripheral device to current
device. You need to select a folder first. You can see a dialogue box asking you to
select a folder if you are selecting a file. System pops up a dialogue box if there is no
configuration file under current folder. After successfully import, system needs to reboot
to activate new setup.
Format: Click Format button, system pops up a dialogue box for you to confirm current
operation. System begins format process after you click the OK button.
To Next Page
Loading...
