Proper Grounding
e machine is pre-wired to be used with a
0-volt (CT200) or 240-volts (CT201)
wer supply. Ensure the cord is plugged
to a grounded power outlet.
To prevent possible electrical hazards, have
a qualified electrician ensure that the line is
properly wired.
120-Volts Power Outlet for CT200
240-Power Outlet for CT201
Th
12
po
in
IMPORTANT
Do not connect the machine to the
ower source before the setup process.
If you fail to do so, serious personal
injury may occur.
8
To Next Page
Loading...
