SETUP
ssi tion
of your eyes both of you need to have
safety glasses. The unpainted surfaces
of the jointer are coated with rust
prevention waxy oil and you will want to
remove this before you begin assembly.
Use a solvent cleaner that will not
damage painted surfaces.
cutter-head, in-feed and out-feed tables,
and the fence before assembly and
operation.
Unpacking
The CT200 is properly packaged in 2
boxes and CT201 is in a wooden crate
for safe transportation. When unpacking,
carefully inspect the crate and ensure
that nothing has been damaged during
transit. Open the crate/boxes and check
that the machine is in a good condition.
The machine is heavy and you should
use a fork truck or get assistance to
move the machine for safe moving
method. You should also clean the
To setup the machine you need an
a stant to help you. For the protec
T200/CT201 is a heavy mC achine. Do
ot over-exert yourself. For safe moving n
method get the help of assistant.
When setting up your machine, you will
want to find an ideal spot where your
jointer will most likely be positioned most
of the time. Consider your complete work
environment as well as working
comfortable with the jointer before
placing your machine in the ideal spot.
CT200 CT201
Minimum work space for the jointer
9
To Next Page
Loading...
Need help?
General
