MODEL CX424 – 1.5 HP DUST COLLECTOR
As part of the growing line of Craftex woodworking equipment, we are proud to offer the CX424
a 1.5-HP Dust Collector. By following the instructions and procedures laid out in this owner’s
manual, you will receive years of excellent service and satisfaction. The CX424 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ...................................... 1.5-HP, Single Phase 120 Volt, 12.5 Amps
Switch ..................................... ON/OFF Switch with Removable Key
Balanced Steel Impeller .......... Yes
Impeller Size .......................... 10”
Air Suction Capacity ............... 950 CFM
Noise Level ............................. 87.1 dB
Collection Bag Volume ........... 0.15 Cubic Meter
Upper Bags ............................. One-Micron Upper Filtration Bag
Intakes .................................... 1 x 5”, 2 x 4”
Overall Dimension .................. L 34" (850mm) x W 22" (560mm) x H 73" (1860mm)
Mobile Base for Ease of Movement.....Yes
Weight .................................... 41 Kg
Warranty ................................. 3 Years
To Next Page
Loading...
Need help?
General
