Craftex CX204 - CX204 Features

5
MODEL CX204 – 10” SCORING TABLE SAW
As part of the growing line of Craftex woodworking equipment, we are proud to offer the
CX204 a 10” Scoring Table Saw with Riving Knife. The Craftex name guarantees Craft
Excellence. By following the instructions and procedures laid out in this user manual, you will
receive years of excellent service and satisfaction. The CX204 is a professional tool and like all
power tools, proper care and safety procedures should be adhered to.
Motor ..............................................3-HP, 220-V, Single Phase TEFC Motor
Drive System ..................................
Miter Gauge....................................T-Slot Miter Gauge
Table Size.......................................Length 27” x Width 44.5” (with Extension Wings)
Floor to Table Height......................36”
Maximum Blade Diameter ..............10”
Riving Knife/Spreader Thickness....0.1”
Blade Tilt.........................................Right
Arbor Size.......................................5/8”
Blade Speed...................................5200 RPM
Scoring Blade Diameter..................3”
Scoring Blade Bore.........................0.78”
Scoring Blade Teeth.......................20
Maximum Depth of Cut @ 90°........3-1/16”
Maximum Depth of Cut @ 45°........2-1/16”
Maximum Rip to Right of Blade ......20” Edge of Table
Maximum Rip to Left of Blade.........24” Edge of Table
Dust Collection Ports......................One 4” Port
Warranty.........................................3 Years
CX204–10” Table Saw
FEATURES