Craftsman 113.197110 User Manual

F
"_L.Save This Manual
For Future Reference
Operators
Manual
MODEL NO.
113.197110
OR
113,197150
10" RADIAL SAW
WITH LEG SET
Serial
Number
Model and serial numbers
may be found at the rear of
the base.
You should record both
model and serial number in
a safe place for future use.
CAUTION:
READ ALL
INSTRUCTIONS
CAREFULLY
CRRFTSMRN
10-INCH RADIAL SAW
• Assembly
• Operating
• Repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. SP5249 Printed in U.S.A.

Craftsman 113.197110 Specifications

General

Model Number	113.197110
Type	Table Saw
Blade Diameter	10 inches
Voltage	120V
Table Size	20 x 26 inches
Arbor Size	5/8 inches

Summary

Safety Information and Warnings

Major Hazards and Signal Words

Details key dangers like workpiece kickback and blade contact, explaining DANGER, WARNING, CAUTION.

Personal, Work Area, and Saw Safety

Operation-Specific Safety

Safety information tailored for crosscutting and ripping operations.

Accessory and Guard Safety

Safety Labels on the Radial Arm Saw

Assembly and Setup Guide

Putting Your Saw Together

Step-by-step instructions for unpacking and assembling the radial arm saw.

Attaching Key Components

Table and Support Setup

Electrical Connections

Guidance on connecting the saw to a power source and ensuring proper grounding.

Controls and Blade Alignment

Location and Function of Controls

Identifies and explains the purpose of various saw controls like switches and locks.

Blade Alignment Procedures

Detailed steps for adjusting elevation, squaring, and ensuring blade parallelism.

Squaring Blade to Table

Ensures the blade is perpendicular to the table for accurate crosscuts and rips.

Cutting Operations and Techniques

Crosscutting Procedures

Ripping Procedures

Using Cutting Accessories

Maintenance, Troubleshooting, and Glossary

Lower Blade Guard Safety Information

Maintaining Your Saw

Trouble Shooting Guide

Diagnosing and resolving common motor and saw operation problems.