Craftsman 113.197250 User Manual

f
A
Save This Manual
For Future Reference
_ARS
Operators
Manual
MODEL NO.
113.197210
1O" ELECTRONIC
RADIAL SAW WITH
23" CABINET AND
1 DOOR
or
113.197250
10" ELECTRONIC
RADIAL SAW WITH
LEG SET
Serial
Number
Model and serial numbers
may be found at the rear of
the base.
You should record both
model and serial number in
a safe place for future use.
FOR YOUR
SAFETY:
READ ALL
INSTRUCTIONS
CAREFULLY
\
\
\
\
113.197210
CRRFTSMRN
10-INCH ELECTRONIC
RADIAL SAW
• Assembly
• Operating
• Repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. SP5250 Printed in U.S.A.

Craftsman 113.197250 Specifications

General

Model Number	113.197250
Type	Table Saw
Blade Diameter	10 inches
Voltage	120V
No Load Speed	3450 RPM

Summary

Safety Information for Radial Arm Saw Operation

Major Hazards and Safety Precautions

Details major hazards like kickback, wrong way feed, and thrown workpieces, with signal words.

Personal, Work Area, and Saw Safety Guidelines

Covers personal safety, work area safety, and general saw safety rules for safe operation.

Safety Labels and Warnings

Locates and explains safety labels on the radial arm saw for user awareness.

Assembling the Craftsman Radial Arm Saw

Unpacking and Identifying Parts

Instructions for unpacking, identifying parts for models 113.197210 and 113.197250.

Mounting Key Components

Steps for attaching the handwheel and mounting the motor securely.

Cabinet and Leg Set Assembly

Detailed instructions for assembling the 23" cabinet or the leg set for the saw.

Mounting the Saw to Cabinet or Leg Set

Procedure for securely mounting the saw assembly onto the cabinet or leg set.

Radial Saw Controls and Digital Display

On/Off Switch and Safety Key

Operation of the power switch, including safety precautions with the yellow key.

Miter, Bevel, and Swivel Locks

How to use and adjust locks for miter, bevel, and swivel positions for accurate cuts.

Digital Display Functions and Setup

Explanation of digital display buttons (BEVEL, MITER, ELEV, RIP) and setting references.

Ensuring Accurate Cuts Through Blade Alignment

Adjusting Elevation and Leveling Table Supports

Steps to ensure smooth arm movement and level table supports for accurate cuts.

Squaring Blade to Table and Fence

Procedures for squaring the blade to the table and fence for precise crosscuts and rips.

Making Blade Parallel to Table

Instructions for setting the blade parallel to the table for edging and preventing workpiece damage.

Performing Crosscuts and Ripping Operations

Types of Crosscuts and Safety Information

Overview of crosscut types and essential safety information for performing them.

Ripping Techniques and Safety Guidelines

Guidance on rip cuts, saw positions, workpiece handling, and safety precautions.

Using Cutting Accessories

Information on using fences, push sticks, and auxiliary fences for various cutting tasks.

Maintaining and Troubleshooting Your Radial Saw

Regular Maintenance and Lubrication

Procedures for cleaning, lubrication, and replacing parts to keep the saw in working order.

Troubleshooting Common Issues

Guides for diagnosing and resolving problems with electronics, motor, and saw operations.

Adjustments for Wear and Lock Operation

How to adjust bevel lock, swivel lock, miter lock, and rip lock for proper function.