Craftsman 113.19761 User Manual

Sears
owners
manual
MODEL NO.
113.19761
Serial
Number
Model and serial
number may be found
at the front of the base.
You should record both
model and serial number
in a safe place for
future use.
CAUTION:
Read GENERAL
and ADDITIONAL
SAFETY
INSTRUCTIONS
carefully
CRRFTSMRNo
IO-INCH
RADIAL SAW
• assembly
• operating
• repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. 63783 Plinted in U.S.A.

Craftsman 113.19761 Specifications

General

Brand	Craftsman
Model	113.19761
Category	Saw
Language	English

Summary

General Safety Instructions for Power Tools

Additional Safety Instructions for Radial Saws

Installation and Assembly Safety

Covers safety during installation, assembly, and alignment.

Safe Ripping Procedures

Specific safety guidelines for ripping operations.

Safe Crosscutting Procedures

Specific safety guidelines for crosscutting operations.

Electrical Connections

Power Supply and Wiring Requirements

Details on voltage, amperage, circuit protection, and wiring.

Locations and Functions of Controls

Key Saw Controls Overview

Identification and basic function of main controls.

Main Cutting Angle and Depth Controls

Detailed Control Operations

In-depth explanations for depth, miter, yoke, carriage, bevel, and power controls.

Arm, Carriage, and Power Controls

Assembly and Alignment

Spreader Alignment for Ripping

Ensuring correct alignment of the spreader for ripping operations.

Removing the Saw Blade

Step-by-step instructions for safely removing the saw blade.

Alignment Procedure

Table Mounting Channel Alignment

Steps to attach and level table support channels.

Front Work Table Installation and Column Adjustment

Installing the front table and adjusting the column support.

Squaring Cross Cut Travel

Aligning the carriage travel to be in a straight line.

Blade Squareness Adjustments

Aligning blade to table and rip fence, addressing heel.

Vertical Heel Adjustment

Correcting heel condition in vertical bevel positions.

Rip Scale Indicator Installation and Adjustment

Setting up the rip scale for accurate measurements.

Basic Saw Operations

Crosscut Requirements and Operation

Miter, Bevel, and Compound Crosscut Operations

Ripping Requirements and Operations

Adjustments to Compensate for Wear

Bevel Lock Lever and Yoke Lock Handle Adjustments

Arm to Column and Carriage Bearing Adjustments

Arm Lock and Index Rod Adjustments

Trouble-Shooting

Accuracy Issues: Angles and Kerf

Ripping and Travel Smoothness Issues

Motor Trouble-Shooting

Motor Performance and Electrical Issues

Repair Parts

Parts List for Model 113.19761

Service

Obtaining Service and Repair Information

Ordering Replacement Parts