To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.196380 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Arbor Size | 5/8 inch |
| Blade Diameter | 10 inches |
| Rip Capacity (Left of Blade) | 12 inches |
| Table Size | 20 x 27 inches |
Details key risks like outfeed zone hazard, kickback, and wrong way feed during operation.
Describes the components and purpose of the saw's safety guard system.
Provides essential personal safety and work area safety guidelines for users.
Procedure for adjusting the arm lock to ensure secure radial arm positioning.
Steps to properly adjust the yoke clamp for smooth carriage movement and alignment.
Instructions for adjusting the bevel lock lever for secure motor angle locking.
Details on adjusting arm-to-column looseness and carriage bearings for accuracy.
Ensures the radial arm is square to the fence for accurate crosscuts.
Procedures to make the saw blade perpendicular to the table surface.
Steps to ensure the blade is square to the fence for reduced kickback.
Critical safety step to align the riving knife with the saw blade.
Explains ripping, its hazards like kickback, and safety measures.
