Craftsman 113.196421 User Manual

S Save This Manual'_
For Future Reference
owner's
manual
MODEL NO.
113.196221
113.196321
SAW WITHLEGS
or
113.196421
CONTRACTOR'S SAW
Serial
Number.
Model and serial numbers
may be found at the front
of the base.
You should record both
model and serial number in
a safe place for future use.
FORYOUR
SAFETY:
READ ALL
INSTRUCTIONS
CAREFULLY
_'_E_A/F_S/ I:RI1FT$MRN
10-1NCH RADIAL SAW
• assembly
• operating
• repair parts
\
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Part No. SP5667 Printed in U.S.A.

Craftsman 113.196421 Specifications

General

Brand	Craftsman
Model	113.196421
Category	Saw
Language	English

Summary

Safety

Major Hazards

Discusses key dangers like outfeed zone, kickback, and wrong feed.

Outfeed Zone Hazard

Explains the danger of pulling hands into the blade from the outfeed side.

Kickback Hazard

Details uncontrolled workpiece propulsion towards the user during ripping.

Guard Function and Features

Explains the purpose and components of the saw's safety guard.

Personal Safety Instructions

Guidelines for user protection, including attire and eye/ear protection.

Work Area Safety Instructions

Assembly

Assembly Steps

General procedure for putting the saw together correctly and safely.

Assembling steel legs

Attaching Carriage - Motor to Arm

Adjustments

Arm Lock Adjusting Wheel

Yoke Clamp Adjustment

Bevel Lock Lever

Adjusting Carriage Bearings

How to ensure smooth, accurate movement of the carriage on the arm.

Alignment

Square Crosscut Travel

Adjusting the radial arm to be perfectly square for accurate crosscuts.

Square Blade to Table for Crosscutting

Ensuring the blade is perpendicular to the table for precise crosscuts.

Square Blade to Fence

Aligning the blade parallel to the fence for safe and accurate ripping.

Install Guard

Proper procedure for attaching the safety guard to the saw.

Align Riving Knife to Blade

Crucial safety step to ensure the riving knife is inline with the blade.

Controls

Riving Knife

Keeps the kerf open to prevent blade pinching and kickback.

Electrical Connections

Power Supply

Requirements for connecting the saw safely to a power source.

Crosscutting

Crosscutting Safety

Hazards and precautions specific to crosscutting operations.

Ripping

Push Sticks and Push Blocks

Outfeed Zone Hazard

Danger of hands being pulled into the blade from the outfeed side.

Kickback

Uncontrolled propulsion of workpiece due to pinching or binding.

Ripping Set-up Procedure

Troubleshooting

Common Motor Issues

Cutting Issues

Saw Mechanism Problems