To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.197751 and is the answer not in the manual?
General safety guidelines for operating power tools to ensure user safety.
Safety warnings and steps related to the initial setup and installation of the saw.
Specific safety guidelines and warnings for ripping operations to prevent kickbacks.
Details on motor specifications, grounding, and wiring for 120V and 240V operation.
Information on the thermal overload protector and its function during operation.
Instructions for unpacking parts, checking contents, and initial preassembly steps.
Step-by-step guide for assembling the steel legs for the saw.
Instructions for securely mounting the saw to its base or a workbench.
Steps to attach and level table mounting support channels for accuracy.
Critical adjustment for column support to ensure proper alignment and stability.
Aligning the saw blade perpendicular to the work table for precise cuts.
Adjusting blade to rip fence to correct "heel" for accurate ripping.
Setting up the rip scale indicators for accurate measurement and cuts.
Explains adjusting saw blade's cutting depth using the elevation crank.
Details on setting and indexing arm/blade for various angles.
Step-by-step guide for performing standard crosscut operations.
Procedures for ripping wood pieces to a specific width.
Instructions for using dado heads and molding attachments.
Adjusting carriage bearings for smooth rolling and proper alignment.
Adjusting arm index rod to compensate for wear in the indexing system.
Diagnosing and correcting inaccurate 0° or 45° miter crosscuts.
Troubleshooting motor binding, smoking, or stopping during ripping.
A chart detailing common motor problems, causes, and suggested remedies.
General maintenance advice, emphasizing cleaning and keeping parts sharp.
Identifying specific points requiring periodic lubrication for smooth operation.
List of recommended accessories with their part numbers for purchase.
Illustrated parts list for the steel leg set of the radial saw.
Illustrated parts list for the arm assembly components.
Guidance on contacting Sears for repair parts and service.
General