Craftsman 115 - Symbols

Some ofthe following symbols may be used on thistool. Please studythemend learntheir meaning. Properinterpreta-
tionof these symbolswfl[allow youto operatethe tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperss Current
Hz Her_. Frequency (cycles per second)
W Watt Power
min Minutes Time
AlterrmtingCurrent Type ofcurrent
-. DirectCurrent "[ypeor a characteristicof current
no No Load Speed Rotationalspeed, at no load
[] Class I! Construction Double-insulated construction
..Jmin Per Minute Revolutions,strokes,surfacespeed, orbitseta., per mince
Wet ConditionsAlert Do not expose to rain or use indamp locations.
To reduce the risk of Injury, usermustread and understand
Read The Operator's Manual operator'smanual before usingthis product.
Protection Alwayswear safety gogg(esorsafety glasseswith sideshields,
Eye
or a full face shieldwhen operatingthis product.
_IL Safety Alert Precautionsthat invotve safety.
your
_) Fal_umto keep your handsawsy from the bk-_dewitt result In
No Hands Symbol serious personal injury.
_) No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
_) No Hands Symbol Failure to keep your hands away from the blade will result in
seriouspersonal injury.
No Hands Failureto keepyour hands away from theblade will resultin
Symbol
seriouspersonaJinjury.
(_) Hot Surface Toreduce the dsk of injuryordamage, avoid oontactwith
any hotsurface.
6