To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.235360 and is the answer not in the manual?
General| Model Number | 315.235360 |
|---|---|
| Category | Saw |
| Brand | Craftsman |
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| Motor | 15 Amp |
| No Load Speed | 5000 RPM |
| Depth of Cut at 90 degrees | 2-3/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Essential safety guidelines and precautions for operating the miter saw to prevent injury.
Explanation of the double insulation safety feature and its implications for grounding.
Details on the saw's motor, blade, and general specifications.
Description of handles, locks, brake, and trigger mechanisms for saw operation.
Information on the fence, guards, mounting, and electrical connection of the saw.
Guide for initial setup, installing the dust guide, and replacing the saw blade.
Procedures for squaring the miter table and saw blade to ensure accurate cuts.
Instructions for adjusting pivot points and the depth stop for optimal performance.
Instructions for performing crosscuts and bevel cuts with the miter saw.
Guidance on compound miter cuts, crown molding, and cutting warped materials.
Tips for supporting long workpieces and clamping wide workpieces securely.
Recommendations for cleaning, lubricants, and materials to avoid for tool longevity.
Guidelines for selecting and safely using extension cords with the power tool.
Steps for checking and replacing worn brush assemblies on the saw's motor.
Visual aids and lists identifying all parts of the miter saw assembly.
Information on obtaining replacement parts and scheduling repair services from Sears.
